TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
A social media video by Blackstone owner Kendall Azevedo shows her husband adding sliding drawers beneath the griddle’s middle shelf with plastic totes and drawer slides. Hunker reports that the components shown cost less than $60, but the setup is model-specific and does not seal out rain or pests.
A DIY storage modification for Blackstone griddles is drawing attention after owner Kendall Azevedo shared a video of her husband fitting sliding plastic-tote drawers beneath the grill’s middle shelf. Hunker reports the reel has received about 3 million views and says the Home Depot components shown cost less than $60, offering owners a low-cost way to store accessories while also carrying fit and weather-protection caveats.
In the Facebook Reel described by Hunker, Azevedo’s husband removes the griddle’s middle shelf and measures where to place the drawer rails. He screws two sets of rail brackets to the shelf, attaches sliding rails to plastic tubs, then reinstalls the shelf with the assembled drawers underneath. The video shows the tubs holding grill tools and other accessories.
Hunker identifies the materials as two HDX 7-gallon Tough Storage Totes, listed at $7.48 each, and VEVOR 14-inch drawer slides, sold in a six-piece pack for $36.99 with hardware included. Based on those listed prices, the two totes and slide pack together cost $51.95, before tax or any additional supplies. Prices and availability can change.
The installation leaves screws protruding from the top of the middle shelf, according to Hunker’s account of the video. Azevedo covers them with the tote lids. The report suggests a metal sheet or repurposed wood as possible alternatives, but does not provide testing or instructions for those options. The couple’s measurements were made for their particular griddle, so other owners would need to measure their own shelf and equipment before buying parts.
A Lower-Cost Storage Option
The modification addresses a practical limitation for owners who find the middle shelf too small for their tools. The griddle already has folding side shelves, a magnetic tool bar and a paper-towel holder, as described by Hunker, but the DIY adds enclosed compartments for items that might otherwise need to be carried separately or stored elsewhere.
For shoppers, the appeal is the reported under-$60 parts cost and the use of readily available components rather than a purpose-built accessory. That figure is not a guaranteed price for every installation: owners may need different rail lengths, different containers or extra hardware, depending on their model and measurements. The project is best understood as a customizable example, not a confirmed universal fit.
There is also a trade-off between convenience and protection. The totes provide drawers, but the report warns that the arrangement is not fully sealed against weather or pests. Hunker advises against storing food in the compartments. Keeping the setup for utensils and other non-food accessories, and checking the drawers after wet weather, may help owners avoid treating them as weatherproof storage.
Popular right now
Dreame L50 Ultra Robot Vacuum and Mop
Bose QuietComfort Wireless Bluetooth Headphones with Active Noise Cancellation, Mic, USB‑C Charging, Deep Bass, 24‑Hour Battery – White Smok
Bose QuietComfort Wireless Noise-Cancelling Over-Ear Headphones, Black
As an affiliate, we earn on qualifying purchases.
How the Shelf Drawers Were Built
Blackstone griddles come with built-in places to keep some cooking items, but Azevedo’s video focuses on the space beneath the middle shelf. The project repurposes that area by turning ordinary storage totes into pull-out drawers using sliding rails. Hunker attributes the attention to the couple’s social media video, rather than to a new Blackstone product or an announcement from the manufacturer.
The source describes a specific build, not a tested installation guide for every model. Its listed components are two 7-gallon totes and a pack of 14-inch slides. Because shelf dimensions and available clearance can vary, the same parts may not fit another griddle as shown. Hunker presents the video as inspiration and notes that owners may need to adjust the number or sizing of drawers to suit their equipment.
““when it comes to the middle shelf, frankly, there’s just not enough room.””
— Hunker’s report, describing the available griddle shelf
Fit and Weather Limits
The report does not identify the precise Blackstone model used in the video or provide shelf measurements, so it is unclear which models can accommodate the same totes and rails without modification. It also does not report long-term testing of the drawer assembly, its load capacity, or how it holds up outdoors.
The quoted prices reflect the figures Hunker gives for the components and may not match current store listings. The article also does not establish that the setup keeps out rain, insects or other pests; instead, it cautions that it is not fully sealed. Owners should not store food in the drawers, and the source does not offer a tested solution for covering the exposed screws beyond noting that Azevedo uses tote lids.
Measure Before Buying Parts
For anyone considering the project, the next step is to measure the griddle’s shelf and clearance before purchasing containers or slides. The video offers a visual example, but Hunker says the couple’s parts were fitted to their own model, and the source does not provide a model-by-model compatibility list or a separate installation guide.
Owners should also decide what they plan to store and account for the drawers’ exposure to the elements. The available information does not indicate that Blackstone has endorsed the modification or announced a compatible drawer accessory. For now, the reported development is a popular owner-made storage idea; further details about broader fit, durability or manufacturer response are not provided.
Key Questions
What does the Blackstone storage DIY add?
It adds sliding plastic-tote drawers beneath the griddle’s middle shelf, using drawer rails attached to the shelf and tubs.
How much do the listed parts cost?
Hunker lists two HDX 7-gallon totes at $7.48 each and a VEVOR 14-inch slide pack at $36.99. Those listed items total $51.95 before tax; actual prices and any extra materials may differ.
Will the same parts fit every Blackstone griddle?
That is not established. The couple measured and fitted the parts to their specific model, so owners should measure their own shelf and available clearance before buying components.
Can food be stored in the DIY drawers?
Hunker advises against storing food there because the setup is not fully sealed against rain or pests. The report shows tools and accessories stored in the drawers instead.
Source: rss
