TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Pro Tool Reviews, in a report produced in partnership with The Home Depot, highlighted four Makita Pro Tool Innovation Award winners available through the retailer: a brad nailer, rebar tying tool, angle impact wrench and magnetic bit accessory. The report lists prices from $5.47 to $3,015, but does not provide current inventory or verify that every price remains in effect.
Pro Tool Reviews has spotlighted four Makita Pro Tool Innovation Award winners that it says are available through The Home Depot: an 18-volt brad nailer, a 40-volt rebar tying tool, an 18-volt right-angle impact wrench and an impact-bit accessory. The report, published in partnership with Home Depot, lists prices and product specifications, though current stock and pricing are not confirmed in the supplied material.
The featured products represent different types of work, from finish carpentry to concrete reinforcement and fastening in confined spaces. The 18V LXT Brushless 2-inch 18-gauge Brad Nailer, model XNB04, accepts nails from 9/16 inch to 2 inches and has a 110-nail magazine. Pro Tool Reviews says it weighs 6.1 pounds in working configuration, is more than 1.5 pounds lighter than its predecessor, and can fire at up to twice the speed of the earlier XNB01. The listed price is $369 for the bare tool.
The 40V max XGT Brushless 16-Gauge Rebar Tying Tool, model GRT01, is listed at $3,015 for the bare tool. According to the report, it handles applications from wire mesh through #9 rebar, offers six tie-strength settings and can make up to 3,600 ties per charge with a 2.5Ah battery. Pro Tool Reviews also says the tool produces ties up to 65% stronger than the comparison it uses, although the supplied report does not specify the testing conditions or baseline behind that figure.
For fastening in tight spaces, the 18V LXT Brushless 3/8-inch Square Drive Angle Impact Wrench, model XLT03, is listed at $279 for the bare tool. The report gives maximum figures of 250 ft-lbs of fastening torque and 390 ft-lbs of nut-busting torque, with a working weight of four pounds. Its three power modes and forward-and-reverse Auto-Stop functions are intended to help manage fastening, according to the product description. The fourth item is Impact XPS Mag Boost, a sleeve with two rare-earth magnets that fits over a compatible bit. Pro Tool Reviews says it can provide up to 10 times the fastening-holding strength of standard power bits; its listed price is $5.47.
Four Tools for Distinct Jobsite Tasks
The selection matters to shoppers because it spans both major cordless equipment and a low-cost accessory, rather than focusing on one trade or price tier. The brad nailer is aimed at finish work where a user may want to avoid a pneumatic hose, while the rebar tool targets repetitive tying on reinforcement jobs. The angle impact wrench is designed for access where a straight tool may not fit, and the magnetic sleeve addresses screw retention during driving.
Those use cases and specifications come from the product report, not independent performance testing included here. Prices also vary sharply: the rebar tying tool is a much larger purchase than the nailer, wrench or bit sleeve. Buyers should compare the tool’s application, required battery platform and included accessories with their needs before treating the listed price as a complete setup cost.
Popular right now
Ninja Flip Toaster Oven & Air Fryer, 8-in-1, Stainless Steel, SP151
Samsung 48-Inch S90H OLED 4K Smart TV (2026)
Breville BES870XL Barista Express Espresso Machine, Brushed Stainless Steel
As an affiliate, we earn on qualifying purchases.
Makita’s Seven Award-Winning Products
The report says Makita received seven Pro Tool Innovation Awards across categories in the awards program. The four products discussed here are among those winners and were identified by the outlet as available at Home Depot. The three other Makita winners named in the source are a 40V max XGT 5-inch paddle-switch flathead grinder, an 18V/40V cordless tower and multidirectional work light, and a 40V max XGT motor unit.
Pro Tool Reviews describes the awards as recognizing tools across 15 categories and notes that it prepared the Makita coverage in partnership with Home Depot. That relationship is relevant to readers evaluating the product roundup: it is a retailer-linked report, not a notice that Home Depot has newly launched these products or a report of a change in Makita’s product lineup.
““In total, Makita took home seven Pro Tool Innovation awards.””
— Pro Tool Reviews
Inventory and Test Details Remain Unclear
The source identifies the four products as available at Home Depot, but it does not establish current store or online inventory, regional availability, or whether the listed prices are still active. The three power tools are priced as bare tools, and the supplied material does not state which batteries, chargers or other accessories are included in any particular retailer listing.
Some performance figures also lack supporting detail in the source. It does not explain the test conditions behind the claims of stronger rebar ties or increased magnetic holding strength, nor does it define the comparison used for those claims. The report’s award recognition and specifications should not be read as a guarantee of results in every application.
Check Listings Before Buying
Readers interested in a product can check Home Depot’s current product listing or contact a local store to confirm price, stock and included components. For the cordless tools, shoppers should also verify battery compatibility and account for any battery or charger needed beyond the bare-tool price. The supplied report does not announce a future product release, sales event or additional update, so no next milestone is stated.
Key Questions
Which four Makita products does the report feature?
They are the XNB04 18V LXT brad nailer, the GRT01 40V max XGT rebar tying tool, the XLT03 18V LXT angle impact wrench and the Impact XPS Mag Boost bit sleeve.
What prices does the report list?
The report lists $369 for the brad nailer, $3,015 for the rebar tying tool and $279 for the angle impact wrench, each as a bare tool. It lists the Mag Boost accessory at $5.47. Current prices are not confirmed.
Are these products confirmed to be in stock at every Home Depot?
No. The report says the products are available through Home Depot, but the supplied material does not confirm current inventory or availability at specific stores.
Did Makita receive only four awards?
No. Pro Tool Reviews says Makita received seven awards. The article features four of the winners and names three others: a flathead grinder, a cordless tower and multidirectional work light, and a motor unit.
Source: rss
